Coordinates Of Yellowstone National Park

Search by address, place or POI

Example: North 47.018711° | East 12.34256°

Input:
The input of the latitude is a decimal number between -89.999999 and 89.999999.
If the degree of breadth is given in S equally south, the number should be preceded past a minus sign.
The input of the longitude is a decimal number between -179.999999 and 179.9999999.
If the longitude is given in W equally westward, the number should be preceded past a minus sign.
If these limit values are non kept with the input, the frame turns red, and/or the fields remain empty.

Decimal degree (WGS84)

Lat: ° (N) Sentry your step!
Since this converter calculates with negative north values instead of positive southward values, you lot take to put a - in front of your value, if it contains the specification S.
Then from 10.12345 S becomes here -10.12345 Due north! Lon: ° (East) Picket your step!
Since this converter calculates with negative east values instead of positive w values, you have to put a - in forepart of your value, if it contains the specification W.
Then from twenty.12345 W becomes hither -20.12345 E!

Example: North 47°i.122 | East 12° 20.553'

The input for the latitude must be betwixt -89 and 89 and must exist an integer.
The input for the longitude must be between -179 and 179 and must be integer.
The input of minutes for breadth and longitude is an optional decimal number, but if it is made information technology must be between 0 and 59.99999.
If these limits are not met, the frame will turn red or the fields will remain empty.

Degrees Minutes (WGS84)

Lat: ° ' (Northward) Attention!
Since this converter calculates with negative north values instead of positive south values, you take to add together a - in front of your caste value, if it contains the specification Due south.
So 10° one.2345' Due south becomes here -ten° i.2345' N! Lon: ° ' (E) Attention!
Since this converter calculates with negative east values instead of positive west values, you have to put a - in front of your caste value, if it contains the specification Due west.
So from 20° 1.2345' W becomes hither -20° 1.2345' Eastward!

Example: North 47° 1' 7.359' | Eastward 12° xx' 33.216'

The input for the latitude must be between -89 and 89 and must be an integer.
The input for the longitude must be between -179 and 179 and must be integer.
The input of minutes for latitude and longitude must exist betwixt 0 and 59 and must be integer.
The input of the seconds for latitude and longitude is optional, but if it is done information technology must exist between 0 and 59.99999.

If these limits are non met during input, the frame volition turn red or the fields volition remain empty.

Degrees Minutes Seconds (WGS84)

Lat: ° ' " (N) Attention!
Since this converter calculates with negative n values instead of positive south values, y'all have to add a - to your degree value, if information technology contains the specification S.
So from ten° 1' 2.345' South becomes here -10° 1' two.345' N! Lon: ° ' " (E) Attention!
Since this converter calculates with negative due east values instead of positive west values, you have to put a - in front of your degree value, if information technology contains the specification West.
So from 20° 1' 2.345'; W becomes hither -twenty° 1' 2.345' E!

Instance: E (E) = 2783009 | N (North) = 1223568

As these coordinates are only used in Switzerland and Liechtenstein, limit values for N and E apply.

The northernmost point is nigh 47.8 degrees and therefore the maximum value for Northward is one,300,000.
The southernmost betoken is nearly 45.viii degrees and therefore the minimum value for N is 1,074,000.
The easternmost signal is about 10.5 degrees and therefore the maximum for Eastward is 2,834,000.
The westernmost indicate is about 5.9 degrees and therefore the minimum value for East is ii,484,000.

If these limits are not met, the frame turns red or the fields remain empty.

CH1903+ / LV95 (Bessel 1841)

Example: Zone 32U | East value 691831 | Northward value 5337164

The zone determines the crude position of the point and should prevent mix-ups.
Valid zone values are from 01A-60X, but without O and I.

Eastern values must be betwixt 100.000 and 900.000.
N values must be between i and 9,999,999.

If these limit values are not adhered to during input, the frame turns red or the fields remain empty.

The letter of the zone is corrected automatically with wrong input.

UTM coordinates (WGS84)

Example: Zone 32U | Programme square PU | Due east value 91831 | North value 37164

The zone determines the rough position of the signal and should forbid mix-ups.
Valid zone values are from 01A-60X, but without O and I.

The filigree square determines the location in the zone and consists of the eastern value (A-Z without O and I) and the northern value (A-5 without O and I).

E values must exist between 1 and 99,999. Missing digits are filled in at the back.
North values must be between 1 and 99,999. Missing digits are padded at the dorsum.
Values below 10,000 must exist filled with zeros at the front so that the two numbers are 5 digits long each.

If these limit values are not adhered to during input, the frame turns red or the fields remain empty.

The letter of the zone is automatically corrected if the input is wrong.

MGRS / UTMREF (WGS84)

Example: R (right value) = 4468298 | H (high value) = 5333791

Since the underlying ellipsoid for these coordinates is merely used in Federal republic of germany, limit values for R and H utilize.
The northernmost point is near 56 degrees and therefore the maximum value for H is 6200000.
The southernmost point is almost 46 degrees and therefore the minimum value for H is 5000000.
The most westerly indicate is almost 5 degrees and therefore the maximum value for R is 5700000.
The easternmost signal is near 16 degrees and therefore the minimum value for R is 2400000.

If these limits are not met, the frame turns cherry-red or the fields remain empty.

Gauss Kruger (Bessel, Potsdam)

Example:
X (longitude, longitude) = HQXT8G | Y (latitude, latitude) = R3WR5H

Input:
The post-obit characters are permitted for X and Y: 0123456789 BCDFGHJKLMNPQRSTVWXZ.
The length can exist between 1 and half dozen characters.

NAC (Natural Area Coding, WGS84)

Case:
sifts.bottled.develop

Input:
The input must always consist of 3 words. Each discussion is separated by a period.

W3W (What 3 Words)

Beispiel:
Brusk Code: 8QQ7+V8, Dublin
Total Code: 8FVHG4M6+2X

Eingabe:
Short Code besteht aus 4 Zeichen, gefolgt von einem + gefolgt von 2 Zeichen, gefolgt von einer Ortsbezeichung
Total Code besteht aus eight Zeichen, gefolgt von einem + gefolgt von 2-3 Zeichen.
Erlaubte Zeichen sind außer beim Ortsnamen: 23456789CFGHJMPQRVWX

Plus Code (google Open Location Code)

Peak

m (Click here to summate the height using the coordinates) The elevation data are based on the SRTM values. These values refer to a base area of 90m², so in steep terrain there can exist larger deviations of upwards to xxx metres.

Address

- Click to display the address to the coordinates Click to display the accost to the coordinates

Hither y'all can convert the most common coordinates into the other formats.
This works in all directions and with all valid values.
The valid values for the respective system can be found by moving the mouse over the input examples.
Later on entering the values to be converted, either click on the calculator or confirm with the Enter key.